stan kenton — Blog — Tiffany Johns

The mellophonium is the primary ancestor of the modern marching mellophone. It is a traditional circular mellophone with the bell straightened out, and usually has a cornet shank. Even many brass players don’t know what a mellophonium is, and those that do (mostly Stan Kenton fans and alto brass nerds like myself) can be forgiven for thinking that “mellophonium” = Conn 16E. In fact, while the Conn 16E is by far the most famous model of mellophonium thanks to its use in the Stan Kenton Orchestra from 1960 to 1963, it is not the only one. There were lots of mellophoniums (mellophonia?) at the time: Holton M-601 and M-602, Reynolds ML-12, Courtois, Couesnon, Vox Ampliphonic, Glier (in E-flat), and more. You can even still buy a new mellophonium in 2022, courtesy of Amati Kraslice and their 16E-like AMP-203.

My 1969 Conn 16E mellophonium, with Conn 1 mouthpiece

The mellophonium has a cool sound that is related to, but not quite the same as, a mellophone (either the traditional circular or bell-front marching variety). Stan Kenton’s electric 4-man mellophonium section inspired the creation of the mellophone bugle in G for use in competitive drum and bugle corps, which in turn directly led to the modern marching mellophone. The marching mellophone was also the mellophonium’s grave digger, because even the early Olds-pattern marching mellophones were much better instruments.

While not the only kind of mellophonium, the Conn 16E was the first (beginning production in 1957), is the most common to find today, and is the quintessential example of the type. Despite this, it is objectively a terrible design. It was built in F with an E-flat crook, so Conn decided to build the valve slides somewhere in between…too long for F, too short for E-flat! (It actually plays best in tune in E with the main tuning slide all the way out…I’ve played gigs with it that way!) Its intonation is a great struggle, it has extremely wide partials that are tricky to center, it has mediocre long-travel pistons, and it has a whiny and difficult upper register that requires tons of alternate fingerings to get anywhere near in tune. It is also an ergonomic nightmare, and every mellophoniumist has to find a grip that isn’t painful. The “standard” (as much as that word can be applied to anything mellophonium-related) grip is to hold it by the 3rd valve slide, like so:

This is the grip that most of the Kenton section used, although they typically canted the instrument less than I do. Some of them grasped the top of the valve block while others cradled the bottom bow. There are a few ways to do it and it really depends on the individual player, but if you’ve just acquired a 16E and haven’t figured out how to hold it yet I recommend trying my canted 3rd valve slide grip as pictured above.

There is also the issue of mouthpieces. The best mouthpiece for a 16E is unquestionably the Conn 1 that came with it. However, while abused and neglected 16Es can be found easily, the Conn 1 is significantly more difficult to find. If your 16E didn’t come with its Conn 1, the only way to get one is usually to find another 16E for sale that comes with it. The same is true for the E-flat crook, which used to be available through Allied Supply (part # C-06028-5) but is not anymore.

If you are a trumpet or horn player that is used to mouthpieces on the smaller side, the Legends Scodwell Mello mellophonium mouthpiece is a great option. That is a new production mouthpiece from Legends Brass that plays as well as the Conn 1, but is equivalent to a trumpet 5C in size. Too small for many players (including me), but you can likely custom order it in a bigger diameter. The Conn 1 has an inner diameter a touch over 18 mm, the same as a Schilke 22 trumpet mouthpiece.

The third option is a Bach traditional mellophone mouthpiece, which has the right cornet shank for the mellophonium. Before I got my Conn 1 I used a Bach 5 of this type, and it was decent but not great. The low and middle registers are nice and beefy, but the high register is very difficult. The beauty of the Conn 1 is that it works well from the lowest F# (sounding B2) all the way up to the scream register (E above the staff and beyond), while the Bach only works well in the staff and below. The Bach really is much better suited for circular mellophones.

Of course, cornet mouthpieces do fit. But deep British-style cornet mouthpieces don’t do anything well on it, and shallower American-style cornet mouthpieces only work for screamer mellophonium parts. They do hilariously well at that (which is why the Kenton section used them when they wanted to be disruptive), but the mellophonium becomes much more of a weapon than a musical instrument when equipped as such.

So, can the 16E be tamed? Oh yes. The Kenton section had it figured out by the end of its time in 1963, and exceptional players like Ray Starling made it sing (it’s this video that made me want to get a 16E of my own back in 2011). And as someone who has played numerous live gigs and recording sessions on mine, I feel qualified enough to say that I have tamed it. It took years of effort, but I feel that the result was worth it.

Now, the more important question. Should you buy one?

The first thing you should know is that you can get them dirt cheap. They were used in high school and college marching bands for years, and Conn didn’t actually didn’t stop making the 16E until 1979, so there are a lot of them still floating around. As they are completely obsolete, when they get found they are put on eBay and bought for a pittance. The only issue is that you can also get similarly-abused ex-school marching mellophones, including the best-of-the-breed Yamahas, for dirt cheap on eBay. And as much as I love my 16E, my cheap eBay find King 1120, Yamaha YMP-201M, and Yamaha YMP-204M were/are much better instruments.

All that said, I do think neglected 16Es and other mellophoniums (except for the Reynolds, which is apparently even worse than the 16E) deserve to be played and loved, or at the very least turned into cool lamps, rather than left to rot or get scrapped. If you want an unusual brass instrument for your collection, need a dirt cheap alto brass instrument and find a suitably-priced mellophonium, or just think mellophoniums are cool, I would encourage you to head to eBay and pick one up. It’s also an excellent choice for someone interested in multitracking, as it records well and adds a unique sound to any instrumentation. (It also accepts trombone mutes!) If, however, you want a gig-ready dirt cheap alto brass instrument, wait for a good deal on a Yamaha or King marching mellophone.

Just, whatever you do, don’t overpay for one. Nobody should be paying $500+ for a 16E. They are worth $200 at most…maybe $300 in pristine condition with a Conn 1 and E-flat crook. I’ve been noticing 16E prices steadily increasing in the past couple of years and I feel bad for whoever is spending that kind of money on an instrument as problematic as a 16E. I got mine for $100 and I feel like that was the right price.

Now that all that exposition is out of the way, here are a couple of videos I’ve made that make extensive use of my Conn 16E mellophonium in a 4-person section a la Kenton:

Here are some more videos of mine that make use of the 16E in combination with marching mellophones (plus a 5-person Conn 16E soli in the Christmas multitrack):

If you’ve made it this far and want to hear more mellophonium, here’s my work-in-progress attempt at a complete list of albums that include mellophonium. I would assume that all of these were Conn 16Es - the Kenton ones definitely were, and the most recent 4 non-Kenton albums were me on my 16E.

Stan Kenton - The Romantic Approach (1961)
Stan Kenton - Kenton’s West Side Story (1961)
Stan Kenton - A Merry Christmas! (1961)
Stan Kenton - Sophisticated Approach (1961)
Stan Kenton - Adventures in Jazz (1961)
Stan Kenton - Adventures in Blues (1961)
Stan Kenton - Mellophonium Moods (1962)
Stan Kenton/Tex Ritter - Stan Kenton! Tex Ritter! (1962)
Stan Kenton - Adventures in Time (1962)
Stan Kenton - Artistry in Bossa Nova (1963)
Lighthouse - Sunny Days (1972)
Stan Kenton - By Request - Volume VI (1973)
Stan Kenton - The Uncollected 1962 Vol. 6 (1983)
Towson State University Jazz Ensemble - Jazz 1985 (1985)
Stan Kenton - Mellophonium Magic (1989)
Finn Mickelborg - Mellophonium Jazz (1990)
The Silencers - Dance to the Holy Man (1991)
Stan Kenton - More Mellophonium Moods (1995)
New York Sound Stage One Orchestra/New York Neophonic Orchestra - Alternate Routes (1996) (solos in “Royal Flush” and “Come Rain or Come Shine”)
Tubby Hayes - Voodoo Session (2009)
La Orquesta Sinfonietta - Canto América (2016) (2 in “El Caldero de Ogun”)
Stan Kenton - Mellophonium Memoirs (2017)
Bootsy Collins - The Power of the One (2020) (1 in “Creepin’”)
Sammy Haig - Cucumber (2021) (1 in “Basement Famous”)
Hollywood Film Noirchestra - Dark Passages (2023) (1 on “I’d Rather Have the Blues”, “Intrigue”, and “Street Of No Return”)

Of course, as mentioned earlier, the Conn 16E was far from the only mellophonium. While it is understandably the one that has seen by far the most use and notoriety thanks to its use in the Kenton band, the other mellophoniums can also be useful instruments. And some of them easily exceed the 16E’s very low bar for playability.

A great example of a refined mellophonium design is the Holton M-602.

The Holton M-602 was the only instrument to be sold as a “marching mellophonium”. Presumably this was to differentiate between the M-601, which had a different wrap. In any case, the M-602 is a much better design than the 16E. It was one of the last mellophonium designs (possibly THE last - mine was made after 1980!), and it shows. It is comfortable to hold, it has slide kickers for the first and third valve (even the renowned Yamaha YMP-204M marching mellophone only has one kicker!), it is easy to play, and it is much more in tune than earlier designs like the 16E. Holton never made a marching mellophone, so it seems that the M-602 was their attempt to compete with the new breed. The result is what I believe to be the only mellophonium that truly feels like a modern instrument. It feels like a cross between the practicality and playability of a marching mellophone, and the sound and feel of a mellophonium.

Now, does that mean it is a replacement for the Conn 16E?

I personally don’t think so. For one, the M-602 is very rare. I’ve only ever seen one turn up for sale online, which is the one I bought. The M-601 is much more common, but it has a much more traditional wrap so it loses a lot of the advantages of the M-602. In terms of ease of acquisition, neither hold a candle to the Conn 16E, which was made in huge numbers and thus grows on trees. But also, the M-602 just does not do the same things the 16E does.

The M-602 has an absolutely gorgeous sound. It is dark, creamy, velvety, chocolatey, and more. Playing it feels like curling up in a warm blanket on a cold winter day. But that exquisite sound does not like to be pushed and it does not like to play high. The Conn 16E invites you to frolic in the upper register and bury a big band, while the M-602 insists that you do nothing of the sort. The M-602 is reserved and polite, and it will not allow you to compromise its elegance. It is an absolute sweetheart, but if you want that Kenton sound you will not get it.

To end this article, here are some pictures of other mellophonium models and prototypes.